Factory Outlets Mov Spd - 36 Sidall Structure Voltage switching type ac lightning surge protector（8/20μs） – Leihao

When the thunderstorm season is coming, lightning protection is particularly important at this time. Lightning enters the room through power lines or other ways, causing damage to people and equipment; LEIHAO Lightning Protection Company has many excellent lightning protection products, of which the surge protector of power supply is an important part. Now we will briefly introduce the parameters and uses of a first-class surge protector.

(1) in the front end of the main power switch in the floor distribution box, LH-50I 4P is generally used as the primary protection of power supply;

② LH-50I 4P should also be used at the low voltage end of transformer and the front end of main power switch.
③ When the distribution box is independent outdoors, LH-50I 4P should also be used as the primary power protection.Equipment connected to AC power supply network is easily affected by many electrical problems that may be expected in unstable operation, which leads to equipment failure, life reduction and even damage. LH-15I series surge protectors are designed to meet the protection requirements of all low-voltage devices for industrial lightning surge.  The product range of this series is classified by product type and power supply category (AC or DC).

LH-200/4p

Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 100KA
Maximum discharge current Imax 200KA
Voltage protection level Up ≤ 3.6KV
Appearance: full arc, no window and no words, white, pad printing

LH-150/4p

Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 80KA
Maximum discharge current Imax 150KA
Voltage protection level Up ≤ 3.0KV Appearance: arc, window, no characters, white, pad printing

LH-120/4p

Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 60KA
Maximum discharge current Imax 120KA
Voltage protection level Up ≤ 2.5KV
Appearance: arc, window, word, white, laser marking

36 Cidell surge（8/20μ s）model definition

Technical parameter

1. product design standard: this product is designed according to relevant international standards IEC, and its performance meets the requirements of national standard GB 18802.1-2011 “low voltage surge protector (SPD) part 1: performance requirements and test methods of surge protector for low voltage distribution system”.

2. Scope of product use: GB50343-2012 Technical Code for Lightning Protection of Building Electronic Information System

3 Selection of surge protector: The primary SPD must be set in the main distribution box at the entrance of building power supply.

4. Product features: This product has the characteristics of low residual voltage, fast response speed, large current capacity (impulse current Iimp(10/350μs) is 25kA/ line, long service life, simple maintenance and convenient installation, etc.

5.Working temperature: -25℃ ~+70℃, working humidity: 95%.