Factory For China Gyea GPS9-12.5 2p Surge Protection Device SPD CE DIN Rail 2p 3p 20ka 40ka 12V 110V 220V 1000V DC Solar Outdoor Surge Power Protection Protective Device

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Factory For China Gyea GPS9-12.5 2p Surge Protection Device SPD CE DIN Rail 2p 3p 20ka 40ka 12V 110V 220V 1000V DC Solar Outdoor Surge Power Protection Protective Device, Our mission is usually to enable you to build long-lasting associations with your shoppers by the power of marketing products and solutions.
We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for China SPD, Surge Arrester, With the enterprising spirit of” high efficiency, convenience, practicality and innovation”, and in line with such serving guidance of “good quality but better price, ” and “global credit”, we’re striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
Signal lightning arrester is a kind of surge protector, which is an important embodiment of internal protection. In today’s rapid development of information technology, the application of signal lightning protection device is more and more common, and has been highly valued by everyone. There are many kinds of signal lightning arresters, which should be reasonably matched according to the corresponding needs.

Data signal lightning protection low level data signal part, including cable TV lightning protection device, twisted pair transmission lightning protection device, communication signal line lightning protection device, satellite receiver antenna lightning protection device, host and service lightning protection device

(1) Primary protection of signal

Twisted pair signal protection (overvoltage protection plug) protects signal system and equipment. The rated voltage is 100vac / DC, and the maximum discharge current ismax of each line is 10kA (8 ~ 20 A) μ s) The response time is less than 10ns.

For power lines, signal lines (analog and digital), for example, 110VAC / DC for telephone equipment; Control and instrument lines and data lines are 12V DC / 8V AC and 24V DC / 15V AC. signal lightning arrester AD / kz-24 shall be installed. LH series surge protective device(in short:SPD,alias:surge protector,surge arrester) is suitable for these industries such as government finance and insurance of their host computer, terminal computer,modem server and transceiver which cable trans mission of 9,15 pim or cable remote-sensing,remote-teting of D style interface device.lt’ll effect reduce the trouble of software and hardware for coming shocked pulse

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Factory For China Gyea GPS9-12.5 2p Surge Protection Device SPD CE DIN Rail 2p 3p 20ka 40ka 12V 110V 220V 1000V DC Solar Outdoor Surge Power Protection Protective Device, Our mission is usually to enable you to build long-lasting associations with your shoppers by the power of marketing products and solutions.
Factory For China SPD, Surge Arrester, With the enterprising spirit of” high efficiency, convenience, practicality and innovation”, and in line with such serving guidance of “good quality but better price, ” and “global credit”, we’re striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.

1. Before the surge protector string is connected to the protected equipment, the power must be turned off, and live operation is strictly prohibited.
2. Installed in series between the lines of the protected equipment, the interface connection must be reliable, and the surge protector has input (IN) and output (OUT) marks. The output terminal is connected to the protected equipment, do not connect reversely. Otherwise, the surge protector will be damaged when lightning strikes, and the equipment will not be effectively protected (refer to the installation and wiring diagram).
3. The ground wire (PE) must be reliably connected to the ground wire of the surge protection system, and the length must be the shortest to achieve the best protection effect.
4. The equipment should be disconnected when installing the grounding wire to avoid damage to the equipment due to the introduction of strong currents such as electric welding from the grounding wire end.
5. Connect the grounding wire of the surge protector and the metal shell of the equipment to the grounding collector bar.
6. During the period of use, the surge protector should be tested regularly. If it fails, it should be repaired or replaced in time to ensure the safety of the protected equipment.
7. Non-professionals should not disassemble it.