Shell material: PA66/PBTFeatures: one-pieceRemote control monitoring function: with configurationShell color: default, customizableFlame retardant rating: UL94 V0
|
●The power must be cut off before installation, and live operation is strictly prohibited
●It is recommended to connect a fuse or automatic circuit breaker in series at the front of the lightning protection module
●When installing, please connect according to the installation diagram. Among them, L1, L2, L3 are phase wires, N is the neutral wire, and PE is the ground wire. Do not connect it wrongly. After installation, close the automatic circuit breaker (fuse) switch
●After installation, check whether the lightning protection module is working properly Discharge tube type, with window: During use, you should regularly check and check the status of the fault display window. When the fault display window is red (or the remote signal terminal of the product with remote signal outputs an alarm signal), it means that the lightning protection module is malfunctioning , It should be repaired or replaced in time.
● Parallel power supply lightning protection modules should be installed in parallel (Kevin wiring can also be used), or double wiring can be used to connect. Generally, you only need to connect any one of the two wiring posts. The connecting wire must be firm, reliable, short, thick, and straight.
Installation diagram