Short Lead Time for China Power Supply and Network Two in One Lightning Arrester

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Short Lead Time for China Power Supply and Network Two in One Lightning Arrester, We’ve been in search of for extensive cooperation with truthful shoppers, accomplishing a completely new cause of glory with buyers and strategic companions.
We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for China Linghtning Arrester, Surge Protector, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have now established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance might be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
Integrated conventional products are mostly used for ordinary twisted-pair signals below 2M (low-speed voltage signals or switching signals and perimeter alarm signals), verified conventional products are mostly used for analog signals or digital signals above 2M (high-speed voltage signals or switching signals and 485 protocol signals, etc.), and plug-in current loop products are mostly used for 4(0)-20mA current loop signals.
Basic content editing Signal lightning protector is a kind of surge protector, which is an important embodiment of internal protection. Today, with the rapid development of information technology, the application of signal lightning protection devices is becoming more and more common, and people attach great importance to it. There are many kinds of signal lightning arresters, and the products should be selected reasonably according to the corresponding requirements. The low-level data signal part of data signal lightning protection includes cable TV lightning arrester, twisted-pair transmission lightning arrester, communication signal line lightning arrester, satellite receiver antenna lightning arrester, host and service lightning arrester

(1) primary protection of signal Twisted pair signal protection (overvoltage protection plug) protects signal system and equipment. The rated voltage is 100VAC/DC, the maximum discharge current Ismax per line is 10 kA (8 ~ 20 μ s), and the response time is ≤10ns. For power lines and signal lines (analog and digital), for example, telephone equipment is 110 VAC/DC; The control and instrument lines and data lines are 12V DC /8V AC and 24V DC /15V AC, so signal lightning arrester AD/kz-24 should be installed.

(2) Signal secondary protection Serial port protector with plug-in selector with protection circuit is used to protect signal system and equipment, and can be used in high transmission occasions. For example, the host and server of the protection port are installed in front of the serial port. The rated voltage is 8V and 12V, the maximum discharge current Ismax is 15kA, and the data transmission rate is 1Mbit/s .. The rated voltage for fine protection is 12vdc, the rated discharge current is 100a (8 ~ 20μ s), and the data transmission rate is 1mbit/s. Coaxial cable signal protector is used to protect computer system using 75 Ω ~ 93 Ω interface. It is installed in front of thick and thin cable network cards. The maximum amplified current Ismax is 20 kA (8 ~ 20 μ s) and the data transmission rate is 16 Mbit/s. Overvoltage protector for broadcasting satellite antenna feeder (cable TV line) is used to protect the equipment of 75ω system, such as antenna amplifier and broadcasting satellite receiving system. The maximum discharge current Ismax is 3.5 ka (8 ~ 20 μ s) and the frequency range is 4 ~ 2050 MHz.We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Short Lead Time for China Power Supply and Network Two in One Lightning Arrester, We’ve been in search of for extensive cooperation with truthful shoppers, accomplishing a completely new cause of glory with buyers and strategic companions.
Short Lead Time for China Linghtning Arrester, Surge Protector, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have now established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance might be expected as our principle of integrity. Devotion and Steadiness will remain as ever.

1. Before the surge protector string is connected to the protected equipment, the power must be turned off, and live operation is strictly prohibited. .
2. Installed in series between the lines of the protected equipment, the interface connection must be reliable, and the surge protector has input (IN) and output (OUT) marks. The output terminal is connected to the protected equipment, do not connect reversely. Otherwise, the surge protector will be damaged when lightning strikes, and the equipment will not be effectively protected (refer to the installation and wiring diagram).
3. The ground wire (PE) must be reliably connected to the ground wire of the surge protection system, and the length must be the shortest to achieve the best protection effect.
4. The equipment should be disconnected when installing the grounding wire to avoid damage to the equipment due to the introduction of strong currents such as electric welding from the grounding wire end.
5. Connect the grounding wire of the surge protector and the metal shell of the equipment to the grounding collector bar.
6. During the period of use, the surge protector should be tested regularly. If it fails, it should be repaired or replaced in time to ensure the safety of the protected equipment.
7. Non-professionals should not disassemble it.